7050 aluminum plate
A high-strength alloy for thick-section aerospace and structural applications. Order standard sizes online or get a quote for custom dimensions.
Choose your size
Width × length (inches)
Prices for 1 piece, before the $90 order minimum
Enter Custom Size
$63.95for 1 piece
Updated Sep 8
Ships in 9 business days
Factos calculates additional savings in your cart.
Cutting included. Orders under $90 are billed at the $90 order minimum. Shipping and tax extra.
Mill certifications included. Select DFARS or Domestic above when required. Certification requirements · Calculate material weight
T7451 and T7651 plate
7050 is used for thick aerospace plate where strength, toughness and stress-corrosion performance matter. Its lower quench sensitivity is useful in thicker sections.
T7451 and T7651 are solution heat-treated, stress-relieved and overaged plate tempers. T7651 has higher typical strength than T7451. They are separate requirements; select the drawing’s specified temper from the currently available options.
Machining and applications
Carbide tooling and cutting fluid are useful for heavy cuts and deep pockets. Confirm machining allowance and grain direction before ordering. Large pockets and thin finished walls benefit from a planned roughing sequence.
- Wing center sections and spar structures
- Fuselage frames and bulkheads
- Large machined aerospace components
Specification references
AMS 4050 is a reference for 7050-T7451 plate; AMS 4201 is a reference for 7050-T7651 plate. ASTM B209 is another plate reference. Match the order to the drawing and supplied certification. Typical manufacturer values are not design allowables or guaranteed minima.